Maintenance and failure analysis of Battery sprayer

Battery sprayer is mainly used for pest control tools and equipment. Many people attach great importance to its use, but they don't care about its maintenance. If it is disabled, just put it aside, which may cause great damage to the Battery sprayer. Not only do you need to pay attention to maintenance when you are using it, but you also need to pay attention to its maintenance when you are not using it. Next, let's take a look at the maintenance and failure analysis of the Battery sprayer.

Here is the content list:

• Battery sprayer lifespan, here are some maintenance tips

• The reason why the Battery sprayers can't spray mist.

Battery sprayer lifespan, here are some maintenance tips

Battery sprayer is the main tool to control pests and diseases. Some farmers attach great importance to us, despise maintenance, and just throw it away after it is disabled. In this way, it will not only be difficult to use next year but also seriously affect the service life of the Battery sprayer. Here is some maintenance knowledge for your reference: First, do a good job of maintenance, check each part in detail, and apply glycerin to any parts that are fixed by screws or are often worn. If any damaged parts are found, they should be repaired in time good for reuse. Second, pay attention to prevent rust, and all parts that can be removed must be removed and cleaned. The inner pipe wall of the spray rod and spray head should be washed with oil to avoid moisture and rust. Third, because most pesticides have a certain corrosive effect on the Battery sprayer after it is disabled, it should be washed with alkaline water in time, and then rinsed with clean water, especially after spraying the Bordeaux mixture, it is best to soak it in alkaline water for 1 ~2h, because Bordeaux liquid is very corrosive. Fourth, after the battery sprayer is out of use, first scrub the surface of the liquid tank, hose, spray rod, and other components, and pay special attention to removing the grease on the pump and the soil in the concave bottom of the liquid tank. Fifth, after completing the above inspection, wrap the small parts in paper and put them in the liquid storage tank to avoid accidental loss. The entire Battery sprayer should be hung in a dry and ventilated warehouse, not in a dark and humid corner, let alone stored in the open air.

The reason why the Battery sprayer can't spray mist.

Among the common faults of Battery sprayers, of them is that they battery sprayer has poor fog and are easy to drip. The reason is that the nozzle holes of the battery sprayer nozzle are blocked. Sometimes the nozzle of the sprayer may not spray mist. Today we will make a simple analysis of the reasons why the Battery sprayer cannot spray the mist: There are two reasons why the Battery sprayer cannot spray the mist. One is that the misting nozzle is blocked. The second is because the pressure is insufficient and it needs to be pressurized. It is very easy to solve the blockage of the nozzle, just remove the nozzle and clean it. If the blockage is flocculent, you can use tweezers to clip it out or use a thin wire to hook it out. If the pressure is insufficient due to air leakage, you can replace the leaking parts, such as sealing rings or leather cups, etc.

Our official website is http://www.gfsprayer.com/. If you work with Battery sprayers or want to know more about our company, you can communicate with us on the website. Our company adheres to the service tenet of "customer first", implements the service of integrity-based and customer-oriented, and takes "excellent quality, multi-faceted technical support, accurate delivery" as the business philosophy, with mutual benefit and common development as the goal. We wholeheartedly provide our friends with high-quality Battery sprayer products and services.