Agriculture sprayer use and installation

Agriculture sprayer is the abbreviation of spray equipment. The sprayer is a device that uses air suction to turn potions or other liquids into mist and spray them evenly on other objects. It is composed of compressed air devices, thin tubes, nozzles, etc. In rural areas, an Agriculture sprayer is an indispensable and important agricultural tool for controlling pests and diseases. Next, let's take a look at the use and installation of the Agriculture sprayer.

Here is the content list:

• Correct use steps of Agriculture sprayer.

• How to install the Agriculture sprayer?

• Which agriculture sprayer nozzle is good for atomization?

Correct use steps of Agriculture sprayer.

Knapsack type Agriculture sprayer is the most common type of electric Agriculture sprayer. The usage method is not very different from others. The steps for correct use generally include the following 5 steps, each of which is very necessary. First, install correctly Agriculture sprayer parts. Check each connection for air leakage. When using it, install clean water to test the spray first, and then install chemicals. Second, when it is officially used, add the medicine first and then add the water, and the liquid level of the medicine should not exceed the safe water level. Before spraying, turn the rocker more than 10 times to make the air pressure in the barrel rise to the working pressure. Do not use too much force when pulling the rocker to prevent the air chamber from exploding. Third, when the chemical solution is charged for the first time since the air chamber and the spray rod contain clear water, the concentration of the chemical solution sprayed in the first 2 to 3 minutes of spraying is low, so attention should be paid to supplementary spraying so as not to affect the control effect of pests and diseases. Fourth, after the work is completed, the residual medicinal liquid in the barrel should be poured out in time, washed with clean water, and dried. At the same time, check whether there is water in the gas chamber. Fifth, if the Agriculture sprayer is not to be used for a short period, the main parts should be cleaned, dried and installed, and stored in a cool and dry place. If it is not used for a long time, all metal parts should be coated with butter to prevent rust.

How to install the Agriculture sprayer?

Install the hand-cranked Agriculture sprayer, and take out accessories such as hoses, switches, spray booms, spray heads, hand levers, connecting rods, and boom mounts. Connect one end of the hose to the water outlet and tighten, and the other end to the lower part of the switch and tighten. Put a rubber pad on the upper part of the switch to prevent water leakage, and tighten the spray rod. Put a rubber pad on the other end of the spray rod, connect the spray head and tighten it. Connect the connecting rod and the spray rod fixing clip to the Agriculture sprayer, then insert the hand rocker into the hole under the Agriculture sprayer, and finally connect the connecting rod to the hand rocker to complete the installation. When using the Agriculture sprayer, do not use excessive force or excessive force to avoid damage to the equipment. Correctly select various nozzles for spraying, and keep a certain distance between the nozzles and the crops when spraying, to avoid the phenomenon of liquid flowing and uneven distribution caused by the distance being too close. After spraying with the Agriculture sprayer, clean the Agriculture sprayer according to the requirements of the product instruction manual, especially the Agriculture sprayer that has been sprayed with herbicides, which should be cleaned carefully.

Which agriculture sprayer nozzle is good for atomization?

Agriculture sprayer metal sprayer atomizes well. In terms of service life, durability, and atomization effect, metal nozzles are better. When spraying, start from the leeward direction, and the walking route should be separated by a certain distance, which is the spray width. The size of the spray width should be flexibly controlled according to the wind speed. When the wind speed is small, the spray width should be appropriately reduced, otherwise, it should be larger, generally 3 meters to 3.5 meters. The spraying time is best to choose in the morning, afternoon, or cloudy day, avoid the hot sun.

If you are interested in Agriculture sprayer, you can contact us, our website is http://www.gfsprayer.com/, you are welcome, and look forward to cooperating with you.