Introduction and information about Battery sprayer

Before spraying two pesticides that cannot or should not be mixed, the Battery sprayer must be cleaned, otherwise, it will not only reduce the efficacy of the pesticide but also easily cause phytotoxicity, resulting in undue losses. The specific cleaning method is: first pour 5% hot alkaline water (water temperature above 60 ℃), make it full of spray bars, nozzles, and other parts, shake it every 10 minutes, and after 2 to 3 hours, put the lye solution Pour out and rinse with clean water 2 to 4 times. Next, let's take a look at the introduction and information about the Battery sprayer.

Here is the content list:

• Battery sprayer features description.

• Instructions for use of the Battery sprayer.

• Troubleshooting method of battery sprayer.

Battery sprayer features description.

Battery sprayer is a more intelligent sprayer among agricultural sprayers, which is often used for horticultural crops such as wheat, corn, and greenhouses. The Battery sprayer, its features are superior to other sprayers. First of all, the biggest feature of Battery sprayers is time-saving and labor-saving. The spraying speed is very fast, which can generally save 2/3 of the time, and the liquid medicine is well atomized, which can double the efficacy. Secondly, the battery of the Battery sprayer has a large capacity and a long working time. It can work continuously for 6 to 8 hours on a single charge. The intelligent work of the Battery sprayer is simple and convenient to operate. Generally, the volume of the Battery sprayer is slightly larger than that of the manual sprayer, and the empty weight is about 8Kg.

Instructions for use of the Battery sprayer.

When spraying medicine, turn on the electric switch first, then turn on the liquid medicine switch, and it can work; close the liquid medicine switch, and the water pump automatically starts to decompress and return, and the hose will not burst. Turn on the switch of the liquid medicine, the pump will automatically start to increase the pressure, and after the liquid medicine is finished, just turn off the electric switch. In terms of configuration, the Battery sprayer generally consists of a battery, a charger, a water pump, and a sprayer barrel. The battery of the Battery sprayer is an electric vehicle battery, which is maintenance-free and can generally be used for more than 3 years when used correctly. The charger adopts high-frequency switching pulse three-stage charging, with high precision, which can effectively improve the service life of the battery, and has automatic protection functions such as overcharge and short circuit, which can automatically repair the over-discharged battery or leave the battery unused for a long time. The battery sprayer's water pump uses an intelligent ultra-high-pressure water pump, which has four characteristics: First, the pressure is high. Compared with the normal sprayer's pressure of 1-1.5Kg, the battery sprayer's pump pressure can reach 5-6Kg; Second, the power consumption is small, only 1.5 to 1.8A; Third, intelligent; Fourth, the electrode has a long service life.

Troubleshooting method of battery sprayer.

First, the battery sprayer's switch is leaking. The wear of the switch gasket or the wear of the switch asbestos wire will cause the switch to leak, and a new gasket or asbestos wire should be replaced. Second, the switch of the Battery sprayer is not flexible. If the sprayer is not used for a long time, the switch will be embroidered with liquid medicine. You can remove the switch and put it in kerosene to clean it, wipe off the rust, apply an appropriate amount of lubricating oil to install it, and then tighten the switch cap. Third, the lack of pressure is caused by the shrinkage hardening or cracking of the leather cup or the loosening of the nut at the bottom of the leather cup. The leather bowl should be slightly pressed or replaced with a new leather bowl, immersed in animal oil, installed after lubricating and expanding, apply a little oil, and tighten the bottom nut. Fourth, the atomization quality of the Battery sprayer is poor. The nozzle orifice of the nozzle may be blocked, the filter screen in the casing is blocked, or the inlet and outlet water ball valves are blocked by dirt, etc. The nozzle holes should be dredged to remove debris; if the casing is blocked, the casing should be disassembled to clean the filter screen, check the ball valve, and remove the dirt.

For more battery sprayer-related questions, please contact us. Years of accumulated R & D and production experience, to provide you with more product services and technical support! Our official website is http://www.gfsprayer.com/. Adhering to the corporate culture of "quality first, customer first", our company has always made unremitting efforts to become a professional Battery sprayer supplier in the industry.